Prices incl. VAT plus shipping costs
Free of shipping costs!
available immediately
Order within 1 min and 21 secs this and other products.
Linnepe Autolift adapter set - Easy installation for Fiat Ducato from 2006/07 onwards
If you want to equip your Fiat Ducato from model year 2006/07 with the Linnepe Autolift, you will need various adapter sets for installation, depending on the equipment of the vehicle. These adapter kits are necessary to attach the Autolift to the vehicle without any problems.
Adapter sets for different systems
Depending on whether you have a 4-post system or a 2-post system, you will need different adapter sets. For a 4-post system, you need a set of 4 adapter sets, while a set of 2 is sufficient for a 2-post system.
Differentiation for new Fiat Ducato with AdBlue technology
With the new Fiat Ducato, you also need to pay attention to whether your vehicle is equipped with AdBlue technology or not. The requirements for the adapter kit vary depending on the equipment. It is important that you select the correct adapter set to ensure correct and safe installation of the car lift.
The adapter kits allow the Linnepe car lift to be fitted to your Fiat Ducato easily and securely. You can be sure that the car lift is firmly attached to the vehicle and therefore offers maximum comfort and safety.
Please note: The support systems are not suitable for installation on panel vans. The adapter kits have been specially developed for the Fiat Ducato from model year 2006/07 and guarantee a perfect fit.
Alignment: | rear |
Set: | 2-tlg. |
Net weight: | 9,3 kg |
Vehicle model: | Fiat Ducato X250/X290, alle Modelle, 06/2006 - ... |
Gross weight: | 10.3 kg |
Variant: | mit/ohne AdBlue |
Chassis: | nicht tragfähige Rahmenverlängerung |