Prices incl. VAT plus shipping costs
Free of shipping costs!
available immediately
PerfectCharge MCA charger - The optimum charging technology for starter and supply batteries
Starter and supply batteries have different requirements. Starter batteries initially require a high current to start the engine. They then serve as an energy buffer with small partial cycles. Supply batteries, on the other hand, are discharged and recharged over longer periods of time using smaller currents. They are therefore subject to a higher load. To ensure that these batteries last a long time and prevent damage, they require special charging technology. This is exactly where the PerfectCharge MCA charger comes into play.
The PerfectCharge MCA charger works with a unique six-stage charging cycle. This ensures optimum charging conditions for all gel, fleece and wet batteries. It can charge quickly and gently to extend the service life of the batteries.
Suitable for all battery types
Thanks to the IUoU charging technology, the PerfectCharge MCA charger is suitable for various battery types. You can set the required charging voltage via DIP switches, which is particularly important when charging lithium batteries with a BMS (battery management system). With the PerfectCharge MCA charger, you can also optimally charge lithium batteries.
Practical functions and extensions
The PerfectCharge MCA charger offers many other useful functions and extensions. Here are some of them:
- Gentle charging of 12 V batteries with optimized 6-stage IUoU charging technology
- Simultaneous charging of two batteries plus starter battery
- Extremely compact and lightweight design, easy to install
- Silent mode for noiseless charging at half power - ideal at night or in parking lots with poor electrical protection
- Standard bus interface for smooth integration into existing bus systems
- Compatible with the Dometic MPC 01 battery controller for perfect energy management
- Useful extensions: Remote control, battery sensor from Hella, temperature sensor
The six-stage charging cycle
The PerfectCharge MCA charger works with a special six-stage IUoU charging characteristic. The individual phases are explained here:
I phase
In the I phase, the empty battery is charged with a constant current (100 % charging current) until the battery voltage reaches the charging voltage.
Uo phase
The 3-stage absorption charging phase begins in the Uo phase. The voltage remains constant (Uo). The battery charge is determined in the first 2 minutes. Then the main charging phase begins, in which the battery is fully charged. As soon as the battery is fully charged or the charging current is below 6 % of the nominal charging current for 15 minutes, the Uo phase ends.
U phase
In the U phase, the charger switches to trickle charging. It automatically switches back to phase 1 every 12 days to revitalize the battery and prevent sulphation.
With the PerfectCharge MCA charger, you can therefore optimally charge your starter and supply batteries and extend their service life. It offers numerous practical functions and extensions to provide the best possible support for your camping equipment.
Ladestrom: | 15 A |
Net weight: | 1,6 kg |
Height dimensions: | 6,3, 63 |
Gross weight: | 1,6 kg |
Nominal voltage: | 110 V, 230 V |
Width dimensions: | 17,9, 179 |
Operating temperature: | -20 - +50 °C |
Group documents: | [dometic_perfectcharge_b1_21_fan] |
Depth dimensions: | 23,8, 238 |
Output voltage: | 24 V |
Typ: | MCA 2415 |