Erleichtere den Einstieg in dein Fahrzeug mit den Freistufen für das Original-Fahrerhaus

Tread steps for the original driver's cabs of the Fiat Ducato manufactured since 2006, as well as of vehicles with identical construction.

Aluminium profile with screwed synthetic safety cover at the edges and anti-slip profile. The tread step is screwed safely to and under the vehicle's crossbeam via the vehicle-specific brackets included in delivery.

The problem: due to its construction, the Fiat Ducato's first step is situated inside the driver's cab at a height of 46 cm above ground. To surmount this height difference, drivers often misuse their steering wheel to climb into the vehicle. This is not possible for the passenger, as no such aid is within his reach. Due to this height difference of 46 cm, getting in is uncomfortable and tiring.

The solution: with the tread steps, the height difference is cut down to approx. 23 cm. The steps are adaptable and adjustable to the existing vehicle construction in vertical position. This is done via entirely vertical profiles at the bottom of every tread. Thus, the set of tread steps can be adjusted specifically to the different vehicle bodies.

New: 4 CDC-coated outer brackets (CDC = cathodic dip coating)

• High corrosion resistance even for hollow spaces and on sharp edges
• Even layer thickness
• Good chemical resistance, also against brake fluid
• Homogenous black surface

Consists of: 2 aluminium tread steps (driver's and passenger's side); 2 sets of CDC-coated brackets (= cathodic dip coating), mounting material; step by step instructions; TÜV certificate; maximum bearing load per tread step: 140 kg.