Prices incl. VAT plus shipping costs
Free of shipping costs!
available immediately
Order within 4 hours, 18 mins and 33 secs this and other products.
Wintertime protective cover for semi-integrated motorhomes - protect your vehicle from all weather conditions
The Wintertime protective cover is perfect for protecting your semi-integrated motorhome from negative influences such as rain, dirt, ice, heat and dirt from birds and trees. It is made from a breathable 3-layer SFS-3 non-woven material with a thickness of 160 g/m², which is not only tear-resistant but also very light. This makes the protective cover particularly easy to handle.
The four zippers on the sides make it easy to access the entrance door and storage compartments. In addition, the protective cover is equipped with an eyelet strip and tensioning straps at the front and rear to make it even easier to attach to your vehicle. This means the cover always fits perfectly and is safe from wind and weather.
The Wintertime protective cover breathes over its entire surface, allowing moisture to evaporate easily via the sides. This prevents condensation from forming, which can lead to mold and rust damage. Your motorhome stays dry and protected, even during longer periods of storage.
Determining the size - find the perfect fit
To find the right size for your Wintertime protective cover, you need to determine the largest belt size of your vehicle. The belt size is calculated as twice the length plus twice the width of your vehicle. You should also take into account any protrusions such as bicycle racks. Slight dimensional tolerances are possible for an optimum fit.
The height of the protective cover is always around 35 cm less than the overall height of your vehicle. This ensures that the cover fits perfectly and offers good protection.
The Wintertime protective cover comes with a tensioning system specially adapted to your belt size. This allows you to attach the cover easily and fasten it securely. There is also a repair kit in case of minor damage, as well as a practical transport and storage bag for the protective cover.
Order the Wintertime protective cover for your semi-integrated motorhome now and protect it from all weather conditions. Your vehicle will thank you for it!
For recreational vehicle: | Motorhome, Semi-integrated motorhomes |
Axle Vehicle model: | Vehicle model 3 |
Height dimensions: | 250, 2500 |
Width dimensions: | 240, 2400 |
Vehicle model: | Semi-integrated motorhome |
Dimensions Length: | 660, 6600 |
Gross weight: | 16.2 kg |
Material Textil: | 19% PE Polyethylene, 81% PP Polypropylene |
Color: | degree |
Net weight: | 12.25 kg |
Dimensions (W x H): | 240 x 250 cm |
Length: | 660 cm |
Girth: | 18 m |
Number of belts: | 16 |
Material: | 19 % PE Polyethylen, 81 % PP Polypropylen |
Article: | Protective cover Wintertime |